Click on the image to check the artwork
1.Use
The machine, using material of polypropylene & high density polyethylene, through heating, extruding and drawing, makes tape that is then winded for weaving of the circular loom.
2.Characteristics
1)The machine can use 100% regenerated PP&PE, powder or grain PP&HDPE to produce the tapes.
2)The screw and cylinder of extruder are made of 38CrMoAl alloy steel; the hardness is over HV950 after nitrogenation treatment.
3)Helical gear reducer made of 20CrMnTi alloy steel is applied to the extruder.
4)The extruder adopts aluminum cast heater, which is endurable.
3.Main Technical Parameters
Type |
110/700B |
110/800B |
120/1000B |
120/1200B |
Diameter of Screw(mm) |
110 |
110 |
120 |
120 |
Ration of Screw L/D |
23：1 |
23：1 |
23：1 |
23：1 |
Rotational Speed of Screw(r/min) |
20-75 |
20-75 |
15-70 |
15-70 |
Width of Die(mm) |
700 |
800 |
1000 |
1200 |
Number of oven |
2 |
2 |
2 |
2 |
Motor power of extruder(kw) |
18.5/22 |
22/30 |
22/30 |
22/30 |
Heating power of extruder(kw) |
34 |
36 |
43 |
47 |
Power of Driving motor(kw) |
5.5 |
5.5 |
7.5 |
7.5 |
Heating power of the oven(kw) |
15 |
15 |
20 |
24 |
Drawing rate |
4-8 |
4-8 |
4-8 |
4-8 |
Thickness of tape(mm) |
0.025-0.08 |
0.025-0.08 |
0.025-0.08 |
0.025-0.08 |
Production capacity(kg/h) |
40-80 |
50-100 |
60-120 |
70-140 |
Drawing speed(m/min) |
50-150 |
50-150 |
50-150 |
50-150 |
Installing Dimension (L×W×H)(mm) |
13300×1350×1260 |
13300×1500×1350 |
14700×1750×1400 |
16500×2050×1450 |
Weight(kg) |
5500 |
6500 |
7500 |
8500 |